Home > Transformer Tester >

On-Load Tap-Changer Tester Hv Switch Tester with Manual Control and Technical Support

Product Categories

TDR Cable Fault Locator [17]
Cable Fault Locator [10]
Cable Fault Pinpointer [9]
Cable Route Tracer [10]
Transformer Tester [72]
CT PT Analyzer [3]
High Voltage Surge Generator [12]
Cable Sheath Fault Locator [5]
Circuit Breaker Analyzer [21]
Cable Identifier [2]
Cable Spiker [2]
Relay Protection Tester [18]
Cable Test Van [1]
Ground Tester [9]
AC DC Hipot Tester [27]
Cable Fault Simulation System [1]
Digital Burn-Through bridge [3]
DC High voltage Power Supply [1]
Energy Storage Capacitor [1]
Portable Cable Fault Location System [14]

Xi'an Xu&Hui Electromechanical Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

On-Load Tap-Changer Tester Hv Switch Tester with Manual Control and Technical Support

Model NO. : XHYZ1668A

Load Way : Electronic Load

Display : Digital

Control : Manual Control

Weight : 0-100Kg

Power Source : AC220V

Power Frequency : 50±1Hz

Ambient Humidity : ≦85%Rh

Power Supply : AC220V±10%

Output Current : 1.0A, 0.5A

Transport Package : Wooden Box Filled with Foam Inside

Specification : 345mm*295mm*175mm

Trademark : XHYZ1668

Origin : China Xi′an

HS Code : 9031809090

Supply Ability : 1000pieces/Year

Customization : Available

After-sales Service : Technical Support

Warranty : 1 Year

Contact Now

On-Load Tap-Changer Tester Hv Switch Tester with Manual Control and Technical Support

The on-load tap-changer is the only moving part that is connected to the transformer circuit, so the detection of the on-load tap-changer is getting more and more attention. In the "Procedures for Handling and Preventive Tests for Electrical Equipment", it is required to check the sequence of actions and the switching time of the on-load tap-changer.
The XHYZ1668A on-load tap-changer tester is mainly used to measure the transition waveform, transition time, transient resistance value, and three-phase synchronization of the on-load tap-changer.

On-Load Tap-Changer Tester Hv Switch Tester with Manual Control and Technical Support

* The instrument has large output current and its weight is light;

* Two-stage current output, wider test range and higher stability;
* Can automatically calculate the transition resistance value and transition time;
* It has perfect protection circuit and strong reliability;
* 5.7-inch large LCD display, it's easy for on-site operation;
* U disk storage function, can store more waveforms data .
* The keyboard and one-button shuttle are operated independently, which makes the instrument more convenient to operate.

Output current	1.0A, 0.5A
Test range	Transition resistance: 0.5Ω~20Ω(1.0A), 0.5Ω~40Ω(0.5A)
Test range	Transition time: 0 ~ 250ms
Test accuracy	Transition resistance: ± (5% reading + 3 words)
Test accuracy	Transition time: ± (0.1% reading + 3 words)
Storage mode	U disk storage, local storage
Ambient temperature	-10 ° C ~ 50 ° C
Ambient humidity	≤85%RH
Working power supply	AC220V±10%
Power frequency	50±1Hz
Size	345 × 295 × 175mm
Weight	5kg

On-Load Tap-Changer Tester Hv Switch Tester with Manual Control and Technical Support

On-Load Tap-Changer Tester Hv Switch Tester with Manual Control and Technical Support Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Xi'an Xu&Hui Electromechanical Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!